Distributing Still Images To A Mobile Phone - Canon VB-C50FSi User Manual

Distributing Still Images to a Mobile Phone

You can view still images and control the camera using the Web service of a mobile phone. You
can easily create still image distribution pages for mobile phones with HTML which uses the
command still.jpg. Sample pages for still image distribution for mobile phones have been provided
for the VB-C50FSi/VB-C50Fi. See below for how to view them.
1. Start up your browser and enter the following URL.
http://192.168.100.1:80/mobile/index.html
* The underlined portion is a sample IP address:HTTP port number. Enter the actual IP address and HTTP
port number that were set on the VB-C50FSi/VB-C50Fi (→ P.3-6, 3-16).
2. Select the language (English or Japanese).
3. The sample page appears.
The sample page has been created in such a way that you can control the camera. Adjust the
zoom and brightness, and specify the camera position. You can perform the operation
corresponding to each key by pressing the dial keys on your mobile phone.
Depending on the model of the mobile phone, there may be cases where the images
do not appear or where it is not possible to control the camera.
Note
● You can control the camera only when other users do not have control privileges.
● The sample screen above is for when the VB-C50FSi/VB-C50Fi is being used. If
Tip
you are using an external camera, the camera control link does not appear.
5-27