Canon VB-C50FSi User Manual page 15

a Notes on Using PoE Hubs
a CAUTION:
● Only use IEEE 802.3af-compliant PoE hubs or midspans.
● When both of a PoE hub and the AC Adapter are connected to the VB-C50FSi,
it runs on the power supply from the PoE hub.
● Some PoE hubs allow the current used by each port to be restricted, but the
VB-C50FSi may not operate correctly when such restrictions are applied. Do
not use such restrictions with the VB-C50FSi.
● Some PoE hubs allow the total current consumed on each port to be restricted,
but the hub may not operate correctly if multiple ports are used.
Refer to the user's manual for your PoE hub.
● Use a cable that conforms to the category 5 or higher standard as the LAN
cable (max. 100 m).
Notes on Using the Motion Detection Function and VBCollector
The Motion Detection Function (→ P.4-37) and VBColletor (→ P.6-11) are not suited
Note
to applications where high levels of reliability are required. Therefore, we recommend
that you not use these functions for monitoring or other purposes if consistently high
levels of reliability are required. Canon accepts no liability whatsoever for faults
resulting from the use of the Motion Detection Function and VBCollector.
a Safe Use of Equipment
Max.100 m
Midspan
PoE hub
Hub
xv