Canon VB-C50FSi User Manual page 61

6 "Audio Reception"
Set "Audio Reception" to "Used" to receive audio which has been sent from the Admin Viewer
and output to the speaker with amp connected to the Multi-Terminal Module (→ P.1-11).
7 "Output Volume"
Set the volume of output audio in a range from 1-100. The larger the numeric value, the louder
the audio will be.
8 "Echo Canceller"
Set "Echo Canceller" to "ON" to prevent acoustic echo when transmitting and receiving audio
from the speaker with amp and microphone connected to the Multi-Terminal Module (→ P.1-
11).
● Use the Multi-Terminal Module (→ P.1-11) when connecting a microphone* or
speaker to the VB-C50FSi.
Note
● Setting "Noise Canceller", "Slope Filter", and "Echo Canceller" to "ON" may have
an effect on the audio volume and quality. Set "ON" or "OFF" according to the
environment where you install and how you use the VB-C50FSi.*
● When sending or receiving audio*, please read carefully "Usage Notice of Audio"
(→ P.iii).
● Use the VB Administration Tools to view or modify the settings for Audio Playback
and recording*.
*
Only available with a particular model (→ P.iii)
Setting Up the HTTP, Camera and Audio Servers (Server)
Audio Reception
• Output Volume
• Echo Canceller
VB-C50FSi
3-19