Canon VB-C50FSi User Manual page 26

System Components and Their Operation
Rear
On the rear of the VB-C50FSi/VB-C50Fi there are the MAC address required for network settings,
a Reset switch that returns the factory default settings and the serial number.
MAC address
The MAC address is required
when setting the IP address
and making other network
settings. Please make a note
of it before installing this unit
(→ P.2-9).
Model Name
VB-C50FSi
NTSC VB-C50FSiN VB-C50FiN
PAL VB-C50FSiP VB-C50FiP
Serial No.
The serial number for
this unit is shown here.
Reset switch
You can revert all settings of
the unit to the factory default
settings by pressing this
button with a thin-tipped
object while turning on the
power switch, and keeping
the button pressed for more
than five seconds after turning
on (→ P.7-22).
Bottom
1-10
VB-C50Fi
Screw hole for arm mounting
Multi-connector
You can connect the
Multi-Terminal Module
VB-EX50 to the VB-
C50FSi/VB-C50Fi via
the connector (→ P.1-
11).
100/10 BT Ethernet connector
(100Base-TX, 10Base-T Auto-Negotiation)
On the VB-C50FSi, this can also be used to
connect to a PoE hub or midspan.
* The connector is oriented differently on the
VB-C50Fi.
Screw hole for tripod
mounting
Power connection
socket