3. Perform Initial Settings for the Camera
Once your PC and the camera are connected, perform the initial settings next. The instructions
here follow on from "2. Connect the Camera to the Network", where one camera is connected to
a PC as an example.
Installation Example
VB-C50Fi
LAN cable
Hub
1. Turn on the network device (in this case, the hub) and then your PC.
Do not turn on the camera at this stage.
Note
2. Insert the CD-ROM provided into your PC and from Explorer etc. double-click
"VBSetup.exe" to start the VB Initial Setup Tool. Turn on the VB-C50Fi.
Ver. 1.0 J/E
D70-0066-01
Supplied CD-ROM
○ ○ ○ ○ ○ ○ ○ ○ ○
Continued on the following page. a
2-7