Canon VB-C50FSi User Manual page 93

Setting Preset Tour
○ ○ ○ ○ ○ ○
Setting up
1. Select an option from Auto Preset Tour.
Select either "For Viewers" or "Always".
2. Select the preset number you want to add to
the Tour Schedule from the Preset setting
area and click the "Add" button.
The preset is registered in the Tour Schedule list. You
can register a maximum of 10 presets.
3. Select a preset in the Tour Schedule list and
with the slide bars in Speed (Z) and Pause
(sec), set the speed for zooming for each
preset and the number of seconds for the
pause in preset position.
Click the "Preview" button (→ P.4-19) to display the
set value in the Preset setting area. Also, the camera
zoom position switches to the preset and you can
check from the Admin Viewer.
4. To set the duration of the Preset Tour, select
"Restrict preset tour time" and enter a start
time and end time.
You cannot set Start Time and End Time on the same
time.
5. Click the "Apply" button.
Check the status list that the settings have been correctly applied and click the "Save Settings"
button to save the settings to the device.
You cannot add a home position to the Tour Schedule list.
Tip
Preset Setting Tool
4-21