Canon VB-C50FSi User Manual page 117

8. Check motion detection status in the server.
To confirm the operating level of motion detection with the settings you have made, check
"Display motion detection status of the server". Motion detection status is displayed as the
icon below.
You cannot save the settings with "Display motion detection status of the server" checked.
Remove the check to save the settings.
[Detection disabled]
[Detected]
[Not detected]
● Because the video distribution frame rate may be lowered when the data is sent
via a proxy server, connection without using a proxy server is recommended while
Note
setting the motion detection.
● The motion detection settings should be adjusted and set in conditions that are as
close as possible to those for actual operation.
● For detailed information on specifying the settings, see Page 6-8.
● Please note that each result of the following features may not match completely:
the "Motion detected (peak block)" shown in this tool, the motion detection status
Tip
of the server and actual status of motion detection.
● When "Display motion detection status of the server" option is selected, external
device and log output, and picture recording are not performed.
● Because the Motion Detection Function detects motion by comparing consecutive
image frames, small movements are less likely to be detected when the video
quality (→ P.3-8) is poor.
● When the VB-C50FSi/VB-C50Fi Motion Detection Function is enabled, the
processing load on the VB-C50FSi/VB-C50Fi is high. Consequently, the video
distribution frame rate may be lowered than when the function is disabled.
9. Click the "Save Settings" button in the Schedule Setting screen to save the
settings, and close the Motion Detection Setting screen.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
This completes the settings for motion detection.
Schedule Setting Tool
4-45