Launching The Viewer; Shutting Down The Viewer; Connecting From Admin Tools - Canon VB-M40 Operation Manual

Launching the Viewer

Launching the Viewer
Important
• The Canon Inc. Certificate must be registered on a PC that is
using the Admin Viewer. (P. 4-3)
• This Operation Guide explains relevant operations based on
the IP address "192.168.100.1" (factory default setting). You
must enter the actual IP address set for the camera when
following instructions.
Access "http://192.168.100.1/" via the web browser.
1
2 Click [Admin Viewer] or [VB Viewer] according to the
user.
3 For [Admin Viewer], enter the user name and
password.
Refer to "User Authentication" in "Chapter 4 Top Page
of the Camera" (P. 4-2) for information on the user
name and password.
7
-4
The viewer is launched.

Shutting Down the Viewer

Close the web browser in the viewer to shut down.

Connecting from Admin Tools

Only the administrator can connect to this viewer.
Launch Admin Tools.
1
(Refer to "Launching the Admin Tools" (P. 6-4) for
information on launching the Admin Tools.)
Click [Admin Viewer].
2