Canon VB-M40 Operation Manual page 139

B201 Event notification failure [info]
Description cannot notify %1 event [%2] (B201)
%1 Event type (ald)
%2 Error number
Meaning The event notification failed.
B202 Event reception failure [info]
Description cannot recv event [%1] (B202)
%1 Error number
Meaning The event could not be received.
B203 Audio message send error [info]
Description audio message send error %1 [%2] (B203)
%1 Message type
%2 Error number
Meaning The audio message could not be sent.
B204 Audio message reception failure [info]
Description audio message recv error [%1:%2] (B204)
%1 Error notification number
%2 Cause of error
Meaning The audio message could not be received.
B301 Audio device error [err]
Description cannot use audio device for %1 [%2:%3]
(B301)
%1 Transmission/reception type (rx | tx)
%2 Error handling (open | write | flush)
%3 Error number
Meaning An audio device error was detected.
Countermeasure If the error is not reset automatically,
arrange for servicing.
B401 Audio device initialization failed [err]
Description audio device initialization error [%1] (B401)
%1 Error number
Meaning The audio device could not be initialized.
The audio server stops.
Countermeasure If the problem persists after rebooting, the
camera is faulty. Arrange for servicing.
B402 Audio server initialization failed [err]
Description audio initialization error [%1] (B402)
%1 Error number
Meaning The audio server could not be initialized.
The audio server stops.
Countermeasure If the problem persists after rebooting, the
camera is faulty. Arrange for servicing.
B403 Settings change failed [err]
Description cannot set config [%1:%2] (B403)
%1 Error notification number
%2 Error number
Meaning The settings could not be updated. The
audio server stops.
Countermeasure If the problem persists after rebooting, the
camera is faulty. Arrange for servicing.
Application (video-related) messages
V001 Starting and shutdown of video server [info]
Description %1 video (V001)
%1 Starting or stopping
Meaning The video server was started/stopped.
V020 Starting intelligent service [info]
Description starting intelligent. (V020)
Meaning Intelligent service was started.
V020 Shutting down intelligence service [info]
Description shutdown intelligent. (V020)
Meaning Intelligent service was shut down.
V200 Video input warning [warning]
Description video %1 warning - %2 (V200)
%1 Video number
%2 Error number
Meaning An error that permits recovery of the video
input system was detected.
Countermeasure Change image size or Q value, or decrease
data size for each JPEG image.
List of Log Messages
8
8
-11