Preparing The Camera For Use - Canon VB-M40 Operation Manual

Preparing the Camera for Use

Performing Initial Settings for the Camera
Before installing the camera, read this chapter and use the VB Initial Setting Tool to
configure the IP address.
"Installing the VB Initial Setting Tool" (P. 2-4)
"Performing Initial Settings for the Camera" (P. 2-5)
Checking Images
When initial settings are complete, access the camera via a web browser and check the
image using the VB Viewer.
"Checking the Camera Image" (P. 2-6)
Installing the Camera
Install the camera to suit the operating environment it will be used in.
"Installation Guide"
Setting the Camera Angle
Use the Camera Angle Setting Tool to set the camera angle via PC operation.
"Installing the Camera Angle Setting Tool" (P. 2-4)
"Chapter 3 Camera Angle Setting Tool"
Configuring the Camera from the Setting Page
The setting page lets you configure basic camera settings, network operations, user
registration, and access restrictions.
"Chapter 5 Setting Page"
Using Admin Tools
Admin Tools let you set viewing restrictions, make preset settings, and make settings for
using intelligent functions. In addition, you can review logs to check on the camera's
operation status.
"Chapter 6 Admin Tools"
2
-2
▼
▼
▼
▼
▼
▼