Canon VB-M40 Operation Manual page 101

If the [Lock camera position] checkbox is selected,
focus cannot be operated.
7 [Smart Shade Control]
Smart shade control can be operated if the control
privileges have been obtained. Smart shade control
operations are the same as in the Admin Viewer. For
details, see "Setting the Smart Shade Control"
(P. 7-14).
If the [Lock camera position] checkbox is selected,
smart shade control cannot be operated.
8 [Display Options]
Select the [Detection Area] or [Detection Results] you
want to show in the image display area from the
following items.
• [Selected Detection Settings Only]
Show the detection areas or detection results only
for those detection settings selected in the detection
setting list.
• [All Detection Settings]
Show the detection areas or detection results for all
detection settings in the detection setting list.
• [Detection Settings of the Same Type]
Show the detection areas or detection results for the
same type of detection settings as those selected in
the detection setting list.
• [Do not display]
No detection areas or detection results are shown.
9 [Restart intelligent function]
If the background image has changed while you were
specifying settings or detection results are not as set,
etc., click this button to restart the intelligent function.
Important
It takes tens of seconds for the intelligent function to restart. No
detection is performed while restarting.
A q [Lock camera position] checkbox
Select this checkbox to move the camera position to a
preset position selected from the preset selection box
and lock it there. Lock the camera position when
specifying detection settings to obtain a correct
detection result.
If camera control privileges are not obtained, this
function is grayed out.
A a Camera position selection box
Select the camera position from the view restriction
presets or the home position. Use the Preset Setting
Tool to set presets or the home position (P. 6-16).
A s [Detection Setting List]
A list with the specified detection settings is shown.
A d [Add]
The [New Detection Settings] dialog box is shown and
detection settings can be added.
A f [Delete]
Delete detection settings selected from the detection
setting list.
A g [Detection Setting Number], [Detection Type]
The detection setting numbers and detection types
selected from the [Detection Setting List] are shown.
A h [Enable these detection settings] checkbox
Select this checkbox to enable the detection settings
that are selected in the detection setting list.
A j [Detection Criteria] tab, [Event] tab
Switch between the Detection Criteria and Event tabs.
• [Detection Criteria]
Specify detection settings name, detection area,
and detection criteria (P. 6-27).
• [Event]
Specify operations to be performed when events
occur (P. 6-28).
A k [Restore settings]
Clear the settings you have specified on the screen of
the tool and restore the settings saved in the camera.
A l [Save settings]
Save the edited detection settings in the camera.
After the detection settings have been specified, be
sure to save the settings in the camera by clicking
[Save settings].
Intelligent Function Setting Tool
6
6
-25