Display Screen Of Intelligent Function Setting Tool - Canon VB-M40 Operation Manual

Notes on Use of This Camera
The intelligent functions are not suitable for applications where high reliability is required. If constant and maximum
reliability is required for surveillance it is not recommended that you use this function. Canon shall assume no
liability for any accident, loss or other undesirable outcomes resulting from intelligent function operations.

Display Screen of Intelligent Function Setting Tool

1 Image Display Area
The image currently captured by the camera is shown.
Detection areas are shown in translucently colored
frames (rectangular or polygonal). Drag to resize the
frames. Also, subjects for which movement has been
detected are shown with a contour line.
Pan, tilt, and zoom operations are the same as in the
VB-M40 Viewer. For details, see "How to Operate the
Viewer" (P. 7-5).
However, when the A q [Lock camera position]
checkbox is selected, the camera is fixed at a preset
position and cannot perform pan, tilt, and zoom
operations.
2 [Switch Screen Size] button
Each time this button is clicked, the screen size of the
image display area switches between "320 x 240" and
"640 x 480."
3 [Switch Mouse Operation] button
Each time this button is clicked, the screen switches
between and
image display area changes.
When the button is set to
created/resized/moved.
6
-24
1
6
7
8
9
, and the mouse operation in the
, detection areas can be
Caution
2 3
5 4 A k A l
While in this mode, the camera orientation will not
change.
When the button is set to
position] checkbox is not selected, pan, tilt, and zoom
operations can be performed.
4 [BLC] button
This button turns on/off backlight compensation. This
control is effective when the image is dark due to
backlight.
5 [Obtain/release Camera Control] button
This button is used to obtain/release the camera
control privileges. For details, see "Obtaining Camera
Control Privileges" (P. 7-7). If camera control privileges
have not yet been obtained elsewhere, such as in the
Admin Viewer, the control privileges will be obtained
the moment the Intelligent Function Setting Tool is
launched.
6 [Focus]
Focus can be operated if the control privileges have
been obtained. Focus operations are the same as in
the Admin Viewer. For details, see "Setting the Focus"
(P. 7-14).
A q
A a
A s
A d
A f
A g
A h
A j
and the A q [Lock camera