Canon VB-M40 Operation Manual page 143

S412 Timer service initialization error [crit]
Description timer initialization error [%1] [%2] (S412)
%1 Error number
%2 Cause of error
Meaning An error occurred in the initialization of the
timer service.
Countermeasure If the problem persists after rebooting, the
camera is faulty. Arrange for servicing.
S413 Timer service runtime error [crit]
Description timer working error [%1] (S413)
%1 Error number
Meaning An error occurred while the timer service
was running.
Countermeasure If the problem persists after rebooting, the
camera is faulty. Arrange for servicing.
S501 Fan stop detected [alert] (VB-M600VE)
Description FAN rotation speed is less than 150rpm.
(S501)
Meaning The camera's internal fan has stopped or
RPM has dropped significantly.
Countermeasure Camera needs to be serviced.
S502 Temperature fuse disconnect detected [alert]
(VB-M600VE)
Description Heater unit error. Fuse is cut off. (S502)
Meaning The temperature fuse on the heater
substrate was disconnected.
Countermeasure Camera needs to be serviced.
List of Log Messages
8
8
-15