Canon VB-M40 Operation Manual page 32

Select the camera specification file and click [Open].
3
The camera specification file will be loaded and
camera names listed will be displayed under [Camera
List].
Note
• The [Select Camera] dialog box will remain open unless the
Camera Angle Setting Tool is shut down or the X at the top
right of the dialog box is clicked.
• The camera list is discarded when the Camera Angle Setting
Tool is shut down. Load the camera specification file the next
time you launch the Camera Angle Setting Tool.
3
-4
Connecting to the Camera
From the camera list, select the camera to connect to and
click [Connect].
Connecting to the Next Camera on the List
Camera list
Click [Next] to disconnect the camera currently
connected and connect to the next camera on the list.
Note
In [Detailed Information], information for the camera selected in
the camera list is displayed.
Camera to be
connected next