Camera Software
Installed Software
VB-M700/600/40 Viewer
(See Chapter 7 "Admin Viewer/VB Viewer")
There are two types of Viewer: the VB Viewer, which can
be used by Guest Users, and the Admin Viewer for
Administrators.
The VB Viewer allows users to configure basic camera
controls and display images.
The Admin Viewer lets you monitor all camera controls
and events.
Only JPEG images are displayed. To display H.264 video,
install the RM-Lite Viewer (P. 1-5).
Admin Tools
(See Chapter 6 "Admin Tools")
The following tools for configuring camera settings and
performing management functions are available:
• Privacy Mask Setting Tool
• Intelligent Function Setting Tool
• Log Viewer
•
Panorama Creation Tool
•
View Restriction Setting Tool
•
Preset Setting Tool
Bundled Software
The bundled Setup CD-ROM contains the following
software. Install the software on a PC to use it.
VB Initial Setting Tool
(See Chapter 2 "Initial Settings")
This tool performs initial settings for the camera.
Camera Angle Setting Tool
(See Chapter 3 "Camera Angle Setting Tool")
With this tool, you can operate the camera during
installation while you view video over the network on a PC.
RM-Lite
(P. 1-5)
This software displays and records images from up to four
cameras in real time.
Proxy Authentication Admin Viewer/Admin
Tools
This software lets you use Admin Viewer/Admin Tools via
a proxy server with proxy authentication. It is saved in the
ProxyAuthSupport folder on the Setup CD-ROM.
SD Card Utility
(See Chapter 8 "SD Memory Card Access")
This tool displays or deletes JPEG images saved on an
SD memory card. It can also convert saved images into
MOV files and save them to a computer.
Network Video Recording Software
(optional)
Additional licenses can be purchased as necessary.
RM-64/RM-25/RM-9
This software allows using network cameras for multipoint
surveillance, and for displaying, recording and playing
back camera video. The number of cameras that can be
1
1
-3