Launching VB-C500 Viewer
Launching VB-C500 Viewer
The various settings of VB-C500 Viewer are specified by accessing the camera via a web
browser. First, access the Settings title page.
Note
This document explains relevant operations based on the IP address "192.168.100.1"
(factory setting). In reality, the customer must enter the IP address set for the camera.
How to Launch
1. Access "http://192.168.100.1/" in the web browser.
2. Click [Admin Viewer] or [VB Viewer] according to the user.
3. If [Admin Viewer] has been clicked, enter the user name and password.
The factory settings are as follows (
User name: root
Password:
camera
The user name "root" is the Administrator account for the camera.
* The password is "camera." Be sure to change them on the [Network] setting page (
3-6
P. xiii):
P. 1-7).