Table of Contents
Advertisement
Set the Pan/Tilt Options
Navigate: Main Menu → Settings → Pan/Tilt
Parameter
Pan Invert
Tilt Invert
Pan/Tilt Swap
Pan/Tilt Encoders
Pan/Tilt Speed
Set the Dimming Options
Navigate: Main Menu → Settings → Dimming Frequency
Set the dimming curve and pulse width modulation (PWM) frequency. The default value is
17.6 kHz.
17.6 kHz - quieter than 2.2 kHz and creates a beam that does not flicker when shown on
•
camera
2.2 kHz - prioritizes flawless, stepless dimming
•
Set the Fan Options
Navigate: Main Menu → Settings → Fan
Select the fan mode for the fixture. The default setting is Auto.
Auto
•
Studio - reduces fan noise, but decreases fixture output by ~20%
•
21
Value
Description
Off
When set to On, inverts pan movement of the mirror to
the opposite direction. The default setting is Off.
On
Off
When set to On, inverts tilt movement of the mirror to the
opposite direction. The default setting is Off.
On
Off
When set to On, pan responds to the tilt channels and tilt
responds to the pan channels. The default setting is Off.
On
When set to On, the pan and tilt encoders correct the
mirror position when the mirror is moved manually
Off
outside of control. You may want to turn Pan/Tilt
Encoders to the Off setting when working on a fixture so
On
that you can move the pan and tilt without correction.
The default setting is On.
Set the speed mode for mirror movement. Refined
Refined
provides smooth movement of the mirror. Fast provides
increased acceleration and speed, but movement is less
Fast
smooth than Refined. The default setting is Refined.
Cyberlight LED User Manual
Advertisement
Table of Contents
