Install The Snoot Accessory - ETC Cyberlight LED User Manual

Install the Snoot Accessory

A snoot accessory for the Cyberlight LED fixture is available separately for purchase. Contact
ETC Technical Services or your authorized ETC dealer for information. See
Services on page 2
The snoot accessory kit contains the snoot and three M3x4 mm hex screws.
Tool needed:
2.0 mm hex key
•
1. Align the snoot below the mirror in the mirror head so that the three screw holes in the
snoot align with the three screw holes in the mirror head.
2. Using a 2.0 mm hex key and the three M3x4 mm hex screws, secure the snoot to the mirror
head.
37
for contact information.
Help from Technical
Cyberlight LED User Manual