Table of Contents
Advertisement
Set Pan and Tilt Options
Navigate: Main Menu → Settings → Pan/Tilt
Menu Item
Pan Invert
Tilt Invert
Pan/Tilt Feedback
Pan/Tilt Limits
Pan Range
Pan/Tilt Speed
Pan/Tilt Home
Mode
Set Dimming Options
Navigate: Main Menu → Settings → Dimming
Set the dimming curve and pulse width modulation (PWM) frequency. The default value is
16 kHz.
• 2.4 kHz - prioritizes flawless, stepless dimming
• 16 kHz - quieter than 2.4 kHz and creates a beam that does not flicker when shown on
camera
19
Options
Description
Off
Invert the pan movement of the fixture.
On
Off
Invert the tilt movement of the fixture.
On
Off
When set to On, the fixture automatically moves
back to the correct pan and tilt positions (based on
position data from the pan and tilt encoders) if the
On
fixture head is manually moved.
Pan Limits
Set pan and tilt limits. Fixture pan and tilt movement
is restricted to the ranges you define.
Tilt Limits
540
Set the range of pan movement.
630
Speed 1
Set the speed (scan mode) of pan and tilt movement.
Use this setting to make fine adjustments to pan and
Speed 2
tilt movement to correct for misstepping when the
Speed 3
fixture is installed on its side (side-hung, or
"Outrig").
Speed 4
Standard
Set the order in which pan and tilt homing is
performed.
Pan First
Tilt First
• Standard: The pan and tilt home procedures run
simultaneously.
• Pan First: The pan home procedure runs to
completion, then the tilt home procedure
begins.
• Tilt First: The tilt home procedure runs to
completion, then the pan home procedure
begins.
Halcyon Gold User Manual
Advertisement
Table of Contents
