Cleaning The Device - Bosch MSGP6 User Manual

Ordering descaling tablets
Order descaling tablets from customer ser-
vice.
Quantity
6 x 18 g
12 x 18 g

Cleaning the device

After descaling, clean all parts thoroughly.
→ Fig. -
23 24
Accessories
Accessory
Height module
Boosting light
module
Blooming light
module
VarioTray
Printed on 100% recycled paper
Order number
311864
311893
Designation
MSGZHB1
MSGZHB2
MSGZHB3
MSGZSCT1
Notes
¡ Clean all parts as indicated in the clean-
ing overview.
¡ After drying re-assemble all parts in re-
verse order.
Assembling the watering unit
→ Fig.
25
Overview of cleaning
→ Fig.
27
Use
Insert another height module when the plants have
almost reached the light unit. You can insert up to
4 height modules.
For an additional portion of light. This way, your
plants grow faster and can be harvested earlier.
Tip: For perfect results, up to two boosting or
blooming light modules can be used alternately to
match the height modules.
The special light for blooming. For maximum
blooming and richer harvesting.
Tip: For perfect results, up to two boosting or
blooming light modules can be used alternately to
match the height modules.
Plant 2 different microgreens and 3 plant capsules
at the same time.
¡ Add 3 spoonfuls (6 g) of nutrients to 3 litres of
fresh tap water and pour into the water bowl.
¡ Assemble the watering unit. Replace the plant
tray with the VarioTray. Insert the watering unit.
¡ Place the contents of one microgreen seed bag
in each of the microgreen sections. Fit the mi-
crogreen cover.
¡ Insert 3 plant capsules in the openings.
¡ Place the light unit on the pump and insert the
power supply unit. The light unit lights up pink
and the sprouting phase begins.
¡ If the microgreens have sprouted after 2-4 days,
remove the microgreen cover and insert a height
module if necessary. The microgreens will be
ready for harvesting after around 7 days.
Cleaning the device en
-
26
17