Maintenance, Cleaning And Storage; Changing The Blade; After Oruning/Storage - Bosch EasyPrune Original Instructions Manual

16 | English
Problem Possible Cause
Blades get stuck in a thick Low battery capacity
branch
Too hard wood
Too big diameter
Wrong cutting position
Power-assisted cutting does not activate with LED flashing when cutting is attempted:
LED flashes red 3 times Wood being cut is too thick/hard
Battery charge is too low
LED flashes red twice Battery temperature too high
Battery temperature too low
LED flashes red once Battery charge is too low
LED solid green then Power-assisted cutting system defective
flashes red fast
LED flashes red fast when Time between cuts too short
cut is attempted
Maintenance and Service

Maintenance, Cleaning and Storage

For safe and proper working, always keep the product
u
clean.
Always wear protective gloves when using, adjusting or
u
cleaning the tool
If the battery is no longer working, please contact an author-
ised after-sales service agent for Bosch power tools.
The spring (4) located between the handles is NOT ex-
changeable and SHOULD NOT be removed. Failure to fol-
low this warning may lead to serious injury.
Changing the blade (see figures D1–D4)
Replacement blade: F 016 800 475
Unlock the tool using safety lock (6).
Use Allen key provided with replacement blade to remove
the blade screw (8) and bushing (11) together, and thus re-
lease the blade.
Insert new blade (1) as shown. Now, insert bushing (11) to-
gether with screw (8) and tighten using Allen key.

After oruning/storage

Clean the exterior of tool thoroughly using a soft brush and
cloth. Do not use water, solvents or polishes. Remove all
debris.
Always lubricate the cutting blade with protective spray be-
fore storage.
Store the tool in a secure, dry place out of reach of children
with the safety lock (6) engaged. Do not leave the tool out-
F 016 L81 522 | (21.11.2019)
Corrective Measure
Grip the upper handle only and remove the tool
by tilting the blade.
Recharge tool, if necessary.
Try cutting in a thinner area of the branch.
Recharge battery.
Ambient temperature too high (do not leave
tool in direct sunlight).
Wait 10–15 minutes to let battery cool down.
Ambient temperature too low (do not use tool
when outside temperatures are below -20°C).
Store tool inside, when not in use.
Recharge battery.
Contact Service Agent.
Slow down between two consecutive cuts.
side, when not in use. Do not place other objects on top of
the tool
After-sales Service and Application Service
www.bosch-garden.com
In all correspondence and spare parts orders, please always
include the 10‑digit article number given on the nameplate
of the product.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: (01) 4666700
Fax: (01) 4666888
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Bosch Power Tools