Projector Sides; Leveling The Projector - Christie M RGB Series Installation And Setup Manual

Projector sides

While standing behind the projector and facing towards the screen, the right side (A) of the projector
is on the right and the left side (B) is on the left.
• Z-direction: projection axis originates at the center of the image plane
• X-direction: horizontal left/right with respect to the image plane
• Y-direction: vertical up/down with respect to the image plane

Leveling the projector

Use the projector feet to level the projector.
To adjust the vertical position of the projector, extend or retract the adjustable feet on the
bottom of the projector using the adjustable knobs on the feet.
Christie recommends adjusting the feet from the side or rear of the projector and not the front
to avoid exposure to the output light.
Christie M RGB Series Installation and Setup Guide
020-103483-04 Rev. 1 (04-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
Installation and setup
25