Table of Contents
Advertisement
Installation and setup
IR/wired remote keypad
The IR/wired remote keypad controls the projector by way of either wireless communications from a
battery-powered infrared (IR) transmitter or a wired interface.
To use the IR remote, direct the keypad toward the projector's front or rear IR sensor and press a
function key. One of the two IR sensors on the projector detect the signal and relay the commands for
internal processing. The remote also offers a connector for wired connections to the projector.
Christie M RGB Series Installation and Setup Guide
22
020-103483-04 Rev. 1 (04-2022)
Copyright
©
2022 Christie Digital Systems USA, Inc. All rights reserved.
Advertisement
Table of Contents
