Christie M RGB Series Installation And Setup Manual page 66

Channel Name
5 Zoom (Coarse)
6 Zoom (Fine)
7 Focus (Coarse)
8 Focus (Fine)
9 Lens Horizontal
Position (Coarse)
10 Lens Horizontal
Position (Fine)
11 Lens Vertical Position
(Coarse)
12 Lens Vertical Position
(Fine)
13 Input
14 Fade Time
15 to 24 Reserved
Christie M RGB Series Installation and Setup Guide
020-103483-04 Rev. 1 (04-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
Connecting devices and establishing communication
Description
172 to 255 = Enables lens
shift
0 = Smallest image
possible (0%)
255 = Largest image
possible (100%)
0 = 0%
255 = 100%
0 = Full left position (0%)
255 = Full right position
(100%)
0 = Full lower position
(0%)
255 = Full upper position
(100%)
1 to 80 = Input index
86 = Load
91 to 170 = Additional
input indices
171 = Execute
0 = 0 seconds
250 = 2.5 seconds
Reserved for future use.
Suggested Notes
starting
position
128
• Locked by the Lens Shift
Enable channel.
• Scaled as a percentage of
the total control range.
• A 250 ms delay exists
before sending this
channel to the projector.
128
• Locked by the Lens Shift
Enable channel.
• Scaled as a percentage of
the total control range.
• A 250 ms delay exists
before sending this
channel to the projector.
128
• Locked by the Lens Shift
Enable channel.
• A 250 ms delay exists
before sending this
channel to the projector.
128
• Locked by the Lens Shift
Enable channel.
• A 250 ms delay exists
before sending this
channel to the projector.
0 To change inputs, send the
following sequence:
Load > Input index > Execute
Channel 1 slider lock can be
used if a keypad is not
available for the input
selection.
— Determines the length of time
it takes for the shutter to open
and close with a fading effect.
— —
66