Remote Controls Configuration; Erase/Delete All Remote Controls; Programmable Functions; Plug-In Radio (Both Versions) - Abexo 051D User Manual

230 vac multifunction control unit
Table of Contents

Advertisement

This function is only available for the model WITH RADIO MODULE (APE-570/0510)
r5
To delete all the remote controls, select the parameter
After about 2 seconds, the control unit displays
y
without flashing, then ALL previously stored remote controls have been DELETED.
When the display shows
r6
r7
The remote controls stored via the functions
po
DEAD MAN OPENING,
VATE PROGRAMMABLE OUTPUT (see parameters
remote control that can be associated with a programmable function, proceed as described in the STORE A REMOTE CONTROL paragraph.
To ASSOCIATE A NEW FUNCTION, select parameter
When it stops flashing, release the (-) KEY. Change the function using the (+) KEY.
The function initially associated with
CLOSING.
r9
The "PLUG-IN RADIO MODULE" section is dedicated to both models (APE-570/0510 - APE-570/0511).
To store or delete a remote control on the plug-in radio module, refer to the manual provided by the manufacturer of the RADIO.
It is possible to change the function engaged by the remote controls stored on the plug-in radio module. To change the function of the
r9
radio, select parameter
function.
Remote controls stored on the plug-in radio module can be associated with one of these functions:
n
go
op
DISABLED,
START,
Remote controls stored on the plug-in radio module are not stored in the control unit memory.

REMOTE CONTROLS CONFIGURATION

r5
n
. Hold down the (+) KEY. The display starts flashing showing
r6
r7
and
pc
DEAD MAN CLOSING,
o1
and
r6
r6
po
is
DEAD MAN OPENING. The function initially associated with
. After 2 seconds, the display shows the associated function. Use the (+) KEY or the (-) KEY to change the
OPEN.
USER MANUAL - 230 VAC MULTIFUNCTION CONTROL UNIT - 051D
DELETE ALL REMOTE CONTROLS
.
PROGRAMMABLE FUNCTION
can be associated with different functions:
op
cL
eL
OPEN,
CLOSE,
o2
in the section of the manual describing programmable outputs). To save a
r7
or
. Hold down the (-) KEY. The display starts flashing showing
PLUG-IN RADIO
24
y
ACTIVATE ELECTRIC LOCK for 3 seconds,
.
do
ACTI-
r6
r7
or
.
r7
pC
is
DEAD MAN

Advertisement

Table of Contents
loading

Related Products for Abexo 051D

Table of Contents