Table of Contents
Advertisement
Safety information
EN
Safety warnings
WARNING! Identify safety measures to protect
the operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
Note:
• The use of other tools will reduce the users' total
working period on this tool.
• Helping to minimise your vibration exposure risk.
ALWAYS use sharp chisels, drills and blades.
• Maintain this tool in accordance with these
instructions and keep well lubricated (where
appropriate).
• Avoid using tools in temperatures of 10 ºC or
less. Plan your work schedule to spread any
high vibration tool use across a number of days.
Health surveillance
All employees should be part of an employer's health
surveillance scheme to help identity any vibration related
diseases at an early stage, prevent disease progression
and help employees stay in work.
Vibration and noise reduction
To reduce the impact of noise and vibration emission,
limit the time of operation, use low-vibration and
low-noise operating modes as well as wear personal
protective equipment.
Take the following points into account to minimise the
vibration and noise exposure risks:
a) Only use the product as intended by its design and
these instructions.
14
MNL_18V CORDLESS JIGSAW KIT_MJS18-Li_V1_211222.indd 14
TTI866JSW
2021/12/22 1:37 PM
Advertisement
Table of Contents
