Table of Contents
Advertisement
Product functions
EN
EN
Intended use
This power tool is intended for cutting wood and similar material e. g. MDF and
chipboard, plastic and metal using appropriate saw blades.
The product must be used in an upright position only with the base plate laying
on a work bench.
The product must not be used on masonry and materials that are harmful to
health.
operation and to observe all the instructions therein.
Automatic work light
The work light (16) automatically illuminates by pressing the on/off switch (Fig 8).
WARNING! Do not look directly into the LED work light (8). The emitted
light is very bright.
Switching on/off
The switch lock is designed to prevent accidental starts.
To operate switch, move the switch lock button(2), left
or right, away from the centre lock position.
1. Switch the product on by pressing the on/off
switch (3) (Fig. 9).
2. Switch the product off by releasing the on/off
switch (3) (Fig. 9).
WARNING! Never attempt to lock the on/off switch (5) in its ON position!
26
MNL_18V CORDLESS JIGSAW KIT_MJS18-Li_V1_211222.indd 26
16
Fig. 8
TTI866JSW
2
3
Fig. 9
2021/12/22 1:37 PM
Advertisement
Table of Contents
