Table of Contents
Advertisement
TTI866JSW
Speed control
Adjust the speed directly when operating with the built-in speed control. The on/
off switch (3) of this product is combined with a speed control. The speed is
controlled by how far the on/off switch is depressed.
Pendulum level
The pendulum action can be adjusted using 4 different
settings. You can adjust the pendulum action during
operation using the pendulum selector lever (11).
(Fig. 10).
0
No pendulum action
1
Low pendulum action
2
Middle pendulum action
3
High pendulum action
NOTE: The optimum pendulum level for each application can be
determined by a practical test.
Note the following recommendations:
•
Select a lower pendulum level or switch off the pendulum action
•
Work on hard materials (e.g. steel) with no pendulum action.
•
You can work on soft materials and saw wood in the direction of the
grain with pendulum action.
Bevel angle
The base plate (10) can be swivelled to the right or left to make bevel cuts up to
45° (Fig. 11). The base plate has lock-in slots at 0°, 15°, 30° and 45° on the left
and right so that the precise bevel angle can be adjusted.
MNL_18V CORDLESS JIGSAW KIT_MJS18-Li_V1_211222.indd 27
Fig. 11
Product functions
11
Fig. 10
2021/12/22 1:37 PM
EN
EN
27
Advertisement
Table of Contents
