Table of Contents
Advertisement
Safety information
EN
Safety warnings
Jig Saw safety warnings
a) Hold power tool by insulated gripping surfaces,
when performing an operation where the fastener
may contact hidden wiring. Fastener contacting a
"live" wire may make exposed metal parts of the power
tool "live" and could give the operator an electric shock.
b) Use clamps or another practical way to secure and
support the workpiece to a stable platform. Holding
the workpiece by hand or against your body leaves it
unstable and may lead to loss of control.
c) Turn the product off immediately, if the cutting
blade gets jammed.
d) Ensure that the workpiece is free of foreign objects
such as screws or nails.
e) The power tool shall not be wet or applied in wet
environment. Keep the handles dry to ensure safe
control.
f) Grip the product securely with two hands so you
have full control at all times.
g) Ensure that the air vents are always unobstructed
and clear. Clean them if necessary with a soft brush.
Blocked air vents may lead to overheating and damage
the product.
h) Switch the product off immediately if you are
disturbed while working by other people entering
the working area. Always let the product come to
complete stop before putting it down.
i)
Do not overwork yourself. Take regular breaks to
ensure you can concentrate on the work and have full
control over the product.
j)
Keep hands away from the sawing area. Do not
reach under the workpiece. Contact with the saw
blade can lead to injuries.
08
MNL_18V CORDLESS JIGSAW KIT_MJS18-Li_V1_211222.indd 8
TTI866JSW
2021/12/22 1:37 PM
Advertisement
Table of Contents
