Table of Contents
Advertisement
TTI866JSW
SEE
TECHNICAL
INSTRUCTION
LEVELS OF YOUR TOOL.
The declared vibration emission value should be used
as a minimum level and should be used with the current
guidance on vibration.
the HSE website has further information.
The declared vibration emission value has been measured
in accordance with a standardised test and may be used
to compare one tool with another.
The declared vibration emission value may also be used
in a preliminary assessment of exposure.
WARNING! The vibration emission value during
actual use of the power tool can differ from the
declared value depending on the ways in which
the tool is used:
• How the materials are grinded, cut or drilled.
• If the tool is in good condition and well maintained.
• Use correct accessory for the tool and ensure it
is sharp and in good condition.
• The tightness of the gripping handles.
• The tool is being used as intended by its design
and these instructions.
While working with this power tool, hand/arm
vibrations occur. Adopt the correct working practices
in order to reduce the exposure to vibration. This
tool may cause hand-arm vibration syndrome if its
use is not adequately managed.
MNL_18V CORDLESS JIGSAW KIT_MJS18-Li_V1_211222.indd 13
SPECIFICATIONS
MANUAL
FOR
Safety information
IN
THE
VIBRATION
EN
THE
13
2021/12/22 1:37 PM
Advertisement
Table of Contents
