Troubleshooting - Kogan KA21CBDISPA User Manual

22kg commercial ice cube maker and water dispenser
Hide thumbs Also See for KA21CBDISPA:
Table of Contents

Advertisement

TROUBLESHOOTING

Problem
There is not enough
water in the water
The add water
bottle.
indicator is
illuminated.
One of the water
filters is blocked.
The ice full
The ice cube basket
indicator is
is filled with ice
illuminated.
cubes.
The ice-making cycle
has been operating
The ice cubes are
for too long.
sticking together.
The temperature of
the water is too low.
The ambient
temperature or water
temperature is too
high.
The appliance is
operating but not
There is a refrigerant
making ice.
liquid leakage.
The pipe in the
cooling system is
blocked.
Possible cause
1. Press the ON/OFF button to turn off the
2. Press the ON/OFF button to resume making
Check both water filters for obstructions and
clean if necessary.
Pull out the ice cube basket and remove ice
cubes using the ice scoop.
1. Press the ON/OFF button to turn off the
2. Wait for the ice cubes to melt, then press the
Ensure the water used is between 8–32°C.
• Ensure the ambient temperature is below
• Ensure the water used is between 8–32°C.
Stop use immediately and contact
help.Kogan.com for assistance.
Stop use immediately and contact
help.Kogan.com for assistance.
Solution
appliance and replace the water bottle with
a new one full of water.
ice.
appliance.
ON/OFF button to resume making ice.
Ensure to press the select button to choose
the small ice cube setting.
32°C.

Advertisement

Table of Contents
loading

Table of Contents