Table of Contents
Advertisement
TROUBLESHOOTING
Problem
The no water
There is no water inside
indicator ' ' is
the ice cube maker.
flashing.
The ice full
The ice bucket is
indicator ' ' is
full/there is too much
flashing.
ice.
The ice-making cycle is
too long.
The ice cubes are
sticking together.
The temperature of the
water in the ice cube
maker is too cold.
The ambient
temperature is too
high.
The temperature of the
water in the ice cube
The ice cube
maker is too hot.
maker is
operating but no
ice is being made.
The refrigerant is
leaking.
The pipes in the
cooling system are
blocked.
Possible cause
Solution
Stop the ice cube maker, fill it with water,
and press the power button again to restart
the appliance.
Remove ice from the ice bucket.
• Stop the ice cube maker and restart it
when the ice cubes melt.
• Adjust the ice cube size to small.
• Change the water.
• Ensure the water is between 8–32°C.
Ensure the ambient temperature is below
32°C.
Ensure the water is between 8–32°C.
Stop use immediately and contact
help.Kogan.com for assistance.
Stop use immediately and contact
help.Kogan.com for assistance.
Advertisement
Table of Contents
