Table of Contents
Advertisement
If a new bottle has been inserted but the add water indicator is still illuminated and the
water pump is not working properly, check on the water filters.
• Water filters in the tank:
1. Pull out the ice cube basket. The water filters are circular and are located at
the bottom of the water tank.
2. Remove the filters by hand and clean them with water. Once cleaned,
reattach the filters.
• Water filter connected to the pipe: A qualified professional will be required to remove
this water filter.
1. Open the top cover and locate the water pipe.
2. Release the hose clamp then unplug the water pipe to reveal the water filter.
3. Remove the water filter by hand and clean it with water.
4. Once cleaned, reattach the water filter. Secure the water pipe with the hose
clamp and replace the top cover.
Top cover
Note:
Do not attempt to clean the water filter connected to the pipe yourself.
After cleaning the water filters, wait for at least three minutes to allow the compressor to
settle before resuming use.
Ice full indicator
If the ice cube basket becomes full, the appliance will stop automatically. The ice full
indicator will illuminate to alert users.
Pull out the ice cube basket then use the ice scoop to collect ice.
Hose clamp
Water pipe
Water filter
Advertisement
Table of Contents
