Before Use - Kogan KA21CBDISPA User Manual

22kg commercial ice cube maker and water dispenser
Hide thumbs Also See for KA21CBDISPA:
Table of Contents

Advertisement

BEFORE USE

Unpacking
Remove the exterior and interior packaging, ensuring the ice cube basket is inside. If any
components are missing, contact help.Kogan.com for assistance.
1. Clean the interior with diluted detergent, lukewarm water, and a soft cloth.
2. Use the water to rinse the interior, then unplug the water drain cap to drain out the
water.
3. Clean the exterior with a solution of mild detergent and warm water.
4. Dry the interior and exterior with a soft cloth.
5. Remove the ice cube basket and clean with water.
Placement
Place the appliance on a flat, dry surface. Ensure there is at least a 10cm clearance around
all sides of the appliance, away from walls and other obstructions.
The power cord and outlet should be easily accessible.
Wait for one hour to allow the refrigerant liquid to settle before use.
Note:
During winter, allow the appliance a few hours to warm to room temperature before
plugging in.

Advertisement

Table of Contents
loading

Table of Contents