Cleaning And Care; Troubleshooting - Kogan KA2ICDISPSA User Manual

2l 2-in-1 ice cube maker and water dispenser
Hide thumbs Also See for KA2ICDISPSA:
Table of Contents

Advertisement

CLEANING & CARE
Ensure the appliance is turned off, the power cord is unplugged, and water is drained before
cleaning.
1. Pour a solution of warm water with diluted detergent into the water tank and the
space below the transparent window inside, then use a soft cloth to wipe the
interior.
2. Use water to rinse the interior and drain out the water by unplugging the drain cap
on the bottom of the appliance.
3. Clean the exterior with a solution of mild detergent and warm water.
4. Dry the interior and wipe the exterior with a soft cloth.

TROUBLESHOOTING

Problem
The low water level
indicator ' ' is
illuminated and the
arrow is flashing.
The full indicator ' '
is illuminated and the
'F' is flashing.
The following error
indicator is
illuminated:
The following error
indicator is
illuminated:
Possible cause
The water tank is low on
water.
There is too much ice.
There may be an
obstruction inside the
appliance affecting the
internal sensor.
The ambient
temperature sensor has
broken.
The appliance is not
resetting properly.
Solution
Turn off the appliance, then fill it with
water and press the power button
again to restart the appliance.
Remove some ice from the appliance.
Remove the obstruction and clean
the appliance.
Stop use immediately and contact
help.Kogan.com for assistance.
Stop use immediately and contact
help.Kogan.com for assistance.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ka2icdispsb

Table of Contents