• This ice cube maker supports voltages between 220–240V with a frequency of 50Hz. • Do not operate the ice cube maker or any other appliance with a damaged cord. If the power cord is damaged, stop use immediately and contact help.Kogan.com for assistance.
Page 4
• Do not cover the power cord. • Keep the power cord away from high traffic areas. • Do not submerge the ice cube maker in water or any other liquids. • Do not use an extension cord as it may overheat and become a fire risk. •...
COMPONENTS LIST • Ice cube maker • Ice scoop • User guide OVERVIEW Ice cube maker Cover Ice shovel Water reservoir (inside) Ice bucket Air outlet Control panel Drain cap Control panel LCD display ON/OFF button Select button Clock button Timer button...
Page 6
LCD display Clock display Cleaning indicator No water indicator Ice cube size indicator Ice full indicator Power indicator Timer delay display Name Description When the appliance is turned on, it will display the current time. Clock display This can be adjusted. When flashing, this means there is no water in the ice cube No water indicator maker.
BEFORE USE Remove the packaging and ensure all components are included. If any components are missing, contact help.Kogan.com for assistance. Open the cover, remove the ice bucket, and clean with water thoroughly. Clean the interior thoroughly with lukewarm water and a soft cloth.
Page 8
3. Press the ON/OFF button on the control panel to turn on the ice cube maker and begin the ice-making cycle. You may select the size of the ice cubes by pressing the select button on the control panel. There are three sizes (small, medium, large). These are reflected by the ice cube size indicator on the LCD display.
Page 9
Setting the timer Depending on whether the ice cube maker is currently on standby or operating, the timer can be set to start or stop operating the ice cube maker after a specified time (0.5–19.5 hours). The default time is set to three hours. To set the timer: 1.
CLEANING & CARE When the cleaning indicator ‘ ’ is flashing, this indicates the ice cube maker needs to be cleaned. Note: If the appliance has been cleaned, press and hold the timer button for five seconds and the cleaning indicator will disappear and reset. Cleaning the interior Ensure the ice cube maker is turned off and unplugged before cleaning.
The refrigerant is Stop use immediately and contact help.Kogan.com for assistance. leaking. The pipes in the Stop use immediately and contact cooling system are help.Kogan.com for assistance.
SPECIFICATIONS Protection type Climate class SN/N/ST Power supported 220-240V, 50Hz Ice making current 0.7A Ice collecting current 1.2A Refrigerant R600a/38g Net weight 11.5kg Vesicant C5H10 Enclosure Stainless steel...
Page 16
Need more information? We hope that this user guide has given you the assistance needed for a simple set-up. For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com...