Maintenance And Disassembly; General Cleaning And Maintenance Procedure - Interacoustics AT235 Service Manual

Service Manual
AT235
2

Maintenance and Disassembly

2.1

General cleaning and maintenance procedure

CAUTION
• Before cleaning the device, always make sure that the device is switched off and disconnected from
the power supply
Use a soft cloth lightly dampened with cleaning solution to clean all exposed surfaces
•
Do not allow liquid to come into contact with the metal parts inside the earphones / headphones
•
• Do not autoclave, sterilize or immerse the instrument or accessory in any fluid
• Do not use hard or pointed objects to clean any part of the instrument or accessory
Do not let parts that have been in contact with fluids dry before cleaning
•
Rubber ear-tips or foam ear-tips are single use components
•
Recommended cleaning and disinfection solutions:
• Warm water with mild, nonabrasive cleaning solution (soap)
Procedure
Clean the instrument by wiping outer case with a lint free cloth lightly dampened in cleaning solution
•
• Clean cushions and patient hand switch and other parts with a lint free cloth lightly dampened in
cleaning solution
•
Make sure not to get any moisture in the speaker portion of the earphones and similar parts
2