AGFA D2RS User Manual page 26

2.4. TABLE AUTOPOSITIONING
 Select an anatomical programme on Digital system control console
Refer to Digital System User manual
 The following screen appears on the table control console and displays the table parameters in
relation with the selected anatomical programme
 Install and position the patient as explained in chapter 2.3. This can be done before or after
table positioning regarding the exam to do and user working habits.

CAUTION: Before any table movement, overall tilting or tabletop movements, make sure there are
no obstacles that can collide during movement.
To prevent injury to the patient, ensure that patient's clothing cannot be trapped in the
equipment. Ensure that the patient remains to the specified handgrips.
The patient must be correctly and securely positioned (using handgrips, footrest...),
before moving or tilting the table.
 Then, press the "MOVE" button and hold it down until the table raises its final position as
shown on the illustration on the left, the message "position reached" is displayed
Digital Remote Controlled Table with dynamic flat panel detector
User's Manual
25