Tomography Use - AGFA D2RS User Manual

2.9. TOMOGRAPHY USE

 After selecting the tomography protocol on Acquisition console LCD screen, press MOVE until
the table reaches its position. The following screen shows on the table console:
The buttons and labels have the following meaning:
Press once : Decrease
Fulcrum Height by 1mm
Keep pressed: Decrease
Fulcrum Height by 5mm
Press: Decrease
Fulcrum Increment by 1mm
Selection indicator for
tomography Slow speed
Selection indicator for
tomography Fast speed
Digital Remote Controlled Table with dynamic flat panel detector
Fulcrum Height,
in mm
Selection indicator for tomography
User's Manual
Fulcrum Increment,
in mm
10°,20°,40°angle.
28
Press once : Increase
Fulcrum Height by 1mm
Keep pressed: Increase
Fulcrum Height by 5mm
Tomography time: value will
be displayed according to the
selected speed and angle.
Press: Increase Fulcrum
Increment by 1mm
Press: Table exits
tomography mode