System Configuration - Renesas QB-78F1030 User Manual

QB-78F1030
1.3

System Configuration

This section shows the system configuration when using the QB-78F1030 connected to a PC (PC/AT
Connection is possible even without optional products.
<1> Host machine
<2> ID78K0R-QB Disk/Accessory Disk
<3> USB interface cable
<4> AC adapter
<5> QB-78F1030
<6> Check pin adapter (optional)
<7> Emulation probe
<8> Exchange adapter
<9> Space adapter (optional)
<10> YQ connector
<11> Target connector
<12> Mount adapter (optional)
<13> Device
<14> Target system
R20UT0289JJ0100 Rev. 1.00
Sep 30, 2010
Figure 1-1. System Configuration
<5>
<6>
<12>
<13>
: IBM PC/AT compatible can be used
: Debugger, USB drivers, manual, etc.
: Cable connecting QB-78F1030 to host machine
: AC adapters classified by region
: This product
: Adapter used for monitoring waveforms with oscilloscope
: High-characteristic FPC type emulation probe
: Adapter that performs pin conversion
: Adapter used for height adjustment
: Connector that connects exchange adapter to target connector
: Connector soldered to target system
: Adapter used for mounting target device into socket
: Target device
<1>
<3>
<4>
<2>
<7>
<8>
<9>
<10>
<11>
<14>
CHAPTER 1 GENERAL
TM
compatible).
Page 4 of 28