Starting Diagtools From The Hard Disk Drive - HP Brio 7100 User Manual

NOTE
CAUTION
A message such as
•
and press any key when ready
This means that the PC cannot find the system files on the diskette.
The problem could be:
a The diskette may be damaged or corrupted. Select another
diskette and create another Hardware Diagnostics diskette (refer
to page 4).
b If there is more than one diskette, you may have inserted the
incorrect one. Try starting the PC from the other diskette(s).

Starting DiagTools from the Hard Disk Drive

To run DiagTools from the hard disk drive, your PC must have the
correct boot (start) configuration. All Net Vectra PCs are provided with
a ready-to-use Hardware Diagnostics dual boot configuration.
If you have a Net Vectra PC, you can start the Hardware Diagnostics
from the hard disk drive. To do this:
1 Quit all applications, shut down the operating system, and restart
your PC. To do this in Windows NT 4.0, click
, and then click
Down
2 When the PC starts you have the choice between Hardware
Diagnostics or your usual operating system. Select the Hardware
Diagnostics option. The Hardware Diagnostics will start
automatically, displaying the Welcome screen (refer to page 10).
Do not remove the
root of the C:\ drive because DiagTools will not work without these files.
Also, DiagTools will not work if you convert the hard disk drive to NTFS
(Windows NT File System) format.
Non-System disk or disk error, Replace
Restart the computer
and
CONFIG.SYS AUTOEXEC.BAT
1 Starting DiagTools
Starting DiagTools from the Hard Disk Drive
appears when the PC starts.
, click
Start
.
files from the
Shut
English 9