1000H - 100Dh: Multiple Processor Error Codes - HP Brio 7100 User Manual

Appendix A The Error Codes
1000h – 100Dh: Multiple Processor Error Codes
Code
0F04h Seek operation failed.
0F05h Eject fails on drive x.
1000h – 100Dh: Multiple Processor Error Codes
Code
1000h Processors don't have unique IDs.
1001h Processor X failed to interrupt processor
Y.
1002h IPI physical mode test failed on processor
X.
1008h MPI arbitration test failed.
1009h Cache coherency test failed.
100Ah Memory consistency test failed.
100Bh I/O access test failed on processor X at
port XXXXh.
76
Explanation
Explanation
English
Details/Parts to Check
If the seek function is supported by the device
controller, replace the controller.
The eject feature is not supported or does not work.
Re-run the diagnostics test.
Details/Parts to Check
Processor ID error.
Check that the processor is correctly configured.
Processor error.
Install a new processor.
Processor error.
Install a new processor.
Processor error.
Check that the processor is correctly configured.
If the error persists, install new processor.
Processor error.
Check that the processor is correctly configured.
If the error persists, install new processor.
Processor error.
Check that processor is
Install a new processor.
Processor error.
Install a new processor.