HP Brio 7100 User Manual page 42

Selecting Batch Tests
Running the Batch Test
NOTE
4 Advanced System Tests
Batch Tests
First, you must configure the batch test. To do this, use the
submenu in the
Parameters
submenu has these commands:
Parameters
•
Batch Parameters
number of passes.
: This command allows you to set the number of times
•
Repeat Count
each test is run, from 1 (run test once), to 256.
•
Test Parameters
To run the batch test you have configured, select the
command in the
Batch
The menu also contains these commands:
Batch
: to save the current batch test (with current settings).
•
Save Batch
: to load a previously saved batch test.
•
Load Batch
You cannot change the order in which the tests are performed.
You can abort a batch test while it is running by pressing
30 English
menu. The
Batch
: to configure the test mode, time limit, and
: to select the tests to include in the batch.
menu.
Edit Batch
Edit Batch
Run Batch
.