HP Brio 7100 User Manual page 76

Appendix A The Error Codes
0500h – 0590h: SCSI Error Codes
Code
0521h CD-ROM read error.
0523h CD-ROM play error.
0524h CD Selftest error.
0525h CD Open error.
0526h CD Close error.
0527h CD buffer error.
0528h Pattern compare failed.
0550h Read timeout.
0560h File not found.
0580h Cannot allocate memory.
0590h Command not supported.
64
Explanation
English
Details/Parts to Check
SCSI CD-ROM error.
Insert a CD-ROM into the CD-ROM drive.
SCSI CD-ROM error.
Insert an audio CD into the CD-ROM drive.
SCSI CD-ROM error.
Insert a CD-ROM into the CD-ROM drive.
SCSI CD-ROM error.
Check if SCSI CD drive supports the Open command.
If error persists, install new SCSI CD-ROM drive.
SCSI CD-ROM error.
Check if SCSI CD drive supports the Close command.
If error persists, install new SCSI CD-ROM drive.
Install new CD-ROM drive.
Data read from sector is incorrect.
SCSI device error
Check the selected SCSI device is connected and
configured correctly.
If error persists, replace SCSI device.
Check that the referenced file exists.
Diagnostic test error.
Remove any installed device drivers and restart the
PC or PC Workstation.
Re-run the diagnostic tests.
The command is not supported by the device.
No action needed.