HP Brio 7100 User Manual page 61

Code
0090h PnP function 00 failed.
0091h PnP function 01 failed.
0094h Number of system device nodes is not
the same as reported.
0095h One or more nodes have larger than
reported size.
0096h ISA bus detected twice.
0097h No EISA bus system device node
0098h Motherboard has no EISA ID
0099h One or more EISA slots are not
configured.
009Ah PnP function 40 failed.
009Bh Invalid number of PnP cards.
009Ch One or more unknown PnP cards.
009Dh No PCI bus system device node.
009Eh Too many PCI buses.
009Fh Insufficient memory.
00A0h PnP function 41 failed.
00A1h NVRam buffer size too big.
00A2h ESCD size is too small.
00A3h ESCD size is too big.
Explanation
0001h – 00CCh: System Error Codes
Details/Parts to Check
Install new system BIOS.
Install new system BIOS.
Install new system BIOS.
If error persists, install new system board.
Check all PnP devices.
Install new system BIOS.
Install new system BIOS.
Install new system BIOS.
Run the ECU, and then re-run DiagTools. If error
persists, install new system BIOS.
Install new system BIOS.
Check all PnP devices.
Install new system BIOS.
Install new system BIOS.
Install new system BIOS.
Delete drivers before running DiagTools.
Install new system BIOS.
Install new system BIOS.
If error persists, install new system board.
Install new system BIOS.
If error persists, install new system board.
Install new system BIOS.
If error persists, install new system board.
Appendix A The Error Codes
English 49