HP Brio 7100 User Manual page 64

Appendix A The Error Codes
0100h – 01A4h: Memory Error Codes
Code
0150h Failure at XXXXXXXXh, bit position bbh.
0160h There is an address short between bit xxh
and yyh.
0170h RAM Refresh is not working.
0171h – RAM Refresh is slower or faster than
0172h expected.
0180h The pattern written at address
XXXXXXXXh was qqqqh. The pattern
read back from that address was pppph.
0181h No Active External Cache Memory.
0182h No extended memory available from
HIMEM.SYS
0183h No extended memory detected.
0184h Data bus test failed
0190h Test failed at address xxxxxxxxh.
01A0h The pattern written at XXXXXXXXh was
qqqqh. The pattern read back from that
address was pppph.
01A1h Configuration access mechanism test
failed.
01A2h TagRAM control register test failed.
52
Explanation
English
Details/Parts to Check
Memory error.
Replace appropriate memory module.
Processor or system board error.
Check that the processor is correctly installed.
If error persists, install new processor.
System timer error.
Install new system board.
System timer error.
Install new system board.
Memory error.
Replace appropriate memory module.
Cache memory error.
Enable external cache memory from BIOS setup.
Memory error.
Replace appropriate memory module.
Memory error.
Replace appropriate memory module.
Install new system board.
Memory error.
Replace appropriate memory module.
Memory error.
Replace appropriate memory module.
Install new processor.
Install new processor.