Running Diagtools From The Special Partition On Your Hard Disk - HP Brio BA200 User Manual

NOTE
1 Running DiagTools

Running DiagTools from the Special Partition on your Hard Disk

Running DiagTools from the Special Partition on your
Hard Disk
To run DiagTools from the special partition on your computer's hard
disk drive, follow this procedure:
1 Quit all applications, shut down the operating system, and restart
your computer.
2 After the initial splash screen with the logo, a message is displayed:
Press <F10> to start Hardware Diagnostics ...
or any other key to proceed
3 Press the F10 key. DiagTools will start automatically, displaying the
Welcome screen (refer to page 6).
If this does not work, it probably means that the special partition has
been disabled. Try running DiagTools from a CD-ROM instead.
Alternatively, if you have not stored any programs or data on your hard
disk drive, you can use the Recovery CD-ROM supplied by HP to restore
the disk image as it came originally from factory.
4 English