Product Compliance; Eu Declaration Of Conformity; Emc Conformity - Renishaw SFP1 Installation And User Manual

RSP3 installation and user's guide
www.renishaw.com

Product compliance

EU declaration of conformity

Contact Renishaw plc or visit
UK declaration of conformity
Contact Renishaw plc or visit

EMC conformity

This equipment must be installed and used in accordance with this installation guide. This product is intended for industrial use only and
should not be used in a residential area or connected to a low voltage power supply network which supplies buildings used for residential
purposes.
FCC (USA only)
Information to user (47 CFR 15.105)
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC rules. These
limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to
cause harmful interference, in which case you will be required to correct the interference at your own expense.
Information to user (47 CFR 15.21)
The user is cautioned that any changes or modifications not expressly approved by Renishaw plc or authorised representative could void the
user's authority to operate the equipment.
Equipment label (47 CFR 15.19)
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.
Issued 06 2022
www.renishaw.com/EUCMM
www.renishaw.com/UKCMM
for the full EU declaration.
for the full UK declaration.
5