RSP3 installation and user's guide
www.renishaw.com
RCP TC-2 and RCP TC-3 switch settings
The temperature can be set using the rotary switch on the rear of the RCP TC-2 or RCP TC-3:
Position
0 - 3
4 (factory set)
5 - 9
NOTE: Please do not change the settings without contacting your supplier.
CAUTION: This unit is not sealed. Please do not insert anything into the gaps under the port lid as it can cause damage to internal
components within the product.
Issued 06 2022
Description
Reserved for future use
Suitable for specified system ambient temperature
Reserved for future use
40