Kyocera TASKalfa 6003i Operation Manual page 441

Setup and Registration (System Menu) > System Menu
Item
IPv6
IPv6
RA (Stateless)
Manual Setting
DHCP
DNS Server
IMPORTANT
After changing the setting, restart the network or turn the machine OFF and then ON.
Set up TCP/IP (IPv6) to connect to the network. This setting is available when [TCP/
IP] is [On].
Select whether to use IPv6.
Value: Off, On
NOTE
Selecting [On] displays IP address in [IP Address (Link Local)] after restarting the
network.
Select whether to use RA (Stateless).
Value: Off, On
NOTE
This function is displayed when [IPv6] is set to [On].
Selecting [On] displays IP address in [IP Address (Stateless)] after restarting the
network.
Manually specify the IP address, prefix length, and gateway address of TCP/IP
(IPv6).
Value
IP Address (Manual): 128-bits address is expressed in eight groups consisting
of four-digit hexadecimal digits. The groups are separated
by colon (:).
Prefix Length: 0 to 128
Default Gateway: 128-bits address is expressed in eight groups consisting of
four-digit hexadecimal digits. The groups are separated by
colon (:).
NOTE
This function is displayed when [IPv6] is set to [On].
To enter "Default Gateway", set [RA (Stateless)] to [Off].
Select whether to use the DHCP (IPv6) server.
Value: Off, On
NOTE
This function is displayed when [IPv6] is set to [On].
Selecting [On] displays IP address in [IP Address (Stateful)] after restarting the
network.
Set DNS server (IPv6).
Value: Auto (DHCP), Manual
When [Manual] is selected, you can enter static DNS server information in the
Primary and Secondary fields provided.
8-57
Description